>WORK HOUSE |
The Work House is a necessity for the site management. Its knock-down structure makes for easy transportation and assembly. Since this is detachable paneling structure, it is easy to rearrange panels (door, window etc.), and replace one single damaged panel. High-density polyurethane injected sandwich panel are excellent in insulating heat and sound, and improve air-conditioning efficiency. It can be customized for almost any locations and applications. Single unit, connected units, and 2-storied units are available. |
|
>CHARACTERISTICS OF WORK HOUSE |
·Single unit, connected units, and 2-storied units are available, and it can be installed a staircase, landing, passage and their roof accordingly. Since this is detachable paneling structure, it is easy to rearrange panels (door, window etc.), and replace one single damaged panel. |
·Its knock-down structure makes for easy transportation and assembly. Connected units, and 2-storied units can be done easily. |
·By using the optional inner panels, it is very easy to change the layout design, and lavatory, shower room, kitchen etc. can be installed inside the unit. |
·40mm thick, high-density polyurethane injected sandwich panel are excellent in insulating heat and sound, and improve air-conditioning efficiency. The unit is spacious and comfortable for all climates. |
·For instant availability, electric wiring, receptacle outlets, breaker, ventilation fan, and lighting fixtures are pre-installed. |
·The unit can be packed compactly and stacked to conserve storage space. This unit has forklift slots at the bottom to be simply moved around. |
·This easy assembly unit will be very cost effective, since it will greatly save the cost of labor for assembly, storage space and transportation (Up to 16 units, 4 units X 4 stacks can be loaded on a large truck). |
|
>3 BASIC CONFIGURATIONS |
·WK45 (WORK HOUSE - 45) W4580 X D2300 X H2669 (Internal D: W4400 X D2120 X H2350) |
·WK54 (WORK HOUSE - 54) W5480 X D2300 X H2669 (Internal D: W5300 X D2120 X H2350) |
·WK72 (WORK HOUSE - 72) W7280 X D2300 X H2669 (Internal D: W7100 X D2120 X H2350) |
|
>SPECIFICATIONS OF WORK HOUSE |
Framework |
Light gauge steel, Knock-Down structure |
Roof |
Rubber sheet covered for water proofing |
Roof Panel |
Polyurethane injected sandwich panel @35mm |
Galvanized and Embossed steel sheeting @3,5mm |
Wall Panel |
Polyurethane injected sandwich panel @40mm |
Galvanized and Embossed steel sheeting @3,5mm |
Window |
Aluminum Frame, Sliding Window |
Door |
Aluminum Frame, Sliding or Flush Door |
Floor |
Plywood covered with water proof sheeting |
Aluminum Drainage |
Lighting Fixture |
FL40W X 2 |
Breaker |
20A |
Receptacle Outlet |
Duplex Type |
Wire Lead-in Point |
One |
Ventilation Fan |
One, a hood is equipped |
|